When you call about a heating or cooling problem, you get a straight answer about what the system probably needs before anything is scheduled. Someone who knows the trade picks up, asks the right questions, and scopes the visit on that call. We work on furnaces, boilers, heat pumps, central air, ductless mini-splits, ductwork, thermostats, and indoor air quality equipment. Residential and commercial, repair and replacement alike.
Weymouth is a city of close to sixty thousand people, and the housing stock reflects that. Older homes on boilers and oil heat sit alongside newer construction with central systems, and plenty of properties in between have equipment that has never been properly serviced or additions that the original ductwork never reached. That variety covers most of what comes through the phone.
Call (781) 926-9789 and we will tell you what it takes to get your system right.
Comfort problems don't wait, and neither do we. We take calls every day from 5:00 AM to 9:30 PM, and when a system stops working entirely, the visit gets prioritized and scoped on the phone before it is dispatched. If the heat is out in the middle of a cold stretch or the cooling has failed during a humid run of summer days, call immediately. We work through what the system was doing before it stopped, which helps narrow the diagnosis before anyone arrives.
For rental properties and small commercial buildings, a system that goes down means a tenant call or a business interruption. We work around occupied spaces and can talk through access arrangements on the same call where the visit is scheduled. The scope and the price are settled before the visit is confirmed, so there are no open questions about what is being agreed to.
Scheduling for non-emergency work is handled the same way. Call, describe what the system is doing, and the visit gets arranged for a time that works. We confirm what the visit covers before you hang up.
A significant share of older homes in this part of Massachusetts were built without central ductwork and have relied on window units or zone heating ever since. A ductless mini-split system changes that without requiring new duct runs through finished walls and ceilings.
Single-zone and multi-zone mini-split systems work well in homes that were never ducted, in additions that sit outside the reach of an existing central system, and in finished basements or attic conversions where running ductwork would be disruptive and expensive. They handle both heating and cooling, and modern cold-climate units perform well through a New England winter.
We handle mini-split installation, repair, and ongoing service. If an existing ductless unit has lost capacity, is making noise, or is no longer responding to controls, that gets diagnosed the same way as any other system. The visit covers the indoor head, the outdoor unit, the refrigerant circuit, and the controls before any repair is recommended. Reach out and we'll start at the unit.
Most calls start with a symptom, not a diagnosis. The job types below are the situations that lead to a service call, and each one gets worked through properly before any repair is quoted.
A furnace, heat pump, or air handler that starts making a sound it was not making before is worth a call before it becomes a breakdown. Banging at startup often points to delayed ignition in a gas furnace. A grinding or squealing noise from an air handler usually involves the blower motor or its bearings. A rattling outdoor unit may be a loose panel or the beginning of a compressor problem. The visit starts at the source of the noise and works outward from there.
Homes that have never had central cooling, or that have relied on window units for years, are strong candidates for a central air installation. The job involves sizing the system correctly for the space, routing ductwork where it does not already exist, and installing the air handler and outdoor condenser unit. Where existing ductwork is in place, the installation is more straightforward, but the ducts still get checked for leaks and proper airflow before the new system is commissioned. Let us handle the install and the permits.
A thermostat that is not reading temperature accurately, losing its schedule, or failing to communicate with the system affects every room in the building. We install programmable thermostats, smart thermostats with remote access, and multi-zone controls that let different areas of a home or building run at different set points. The visit confirms compatibility with the existing equipment before any wiring is done.
A system that runs for hours without reaching the set temperature is not just uncomfortable. It is also running up the energy bill and wearing out the equipment faster than it should. The cause might be a refrigerant charge that is low, an evaporator coil that is dirty or iced over, a blower that is not moving enough air, or ductwork that is losing conditioned air before it reaches the rooms it is supposed to serve. Duct sealing and air handler service both come into this diagnostic, and we work through each possibility before recommending a fix.
A register that used to push air and no longer does is usually a ductwork problem, a blower problem, or both. Disconnected duct sections, collapsed flex duct, and sealed-off runs are all common in older homes, and a blower motor that is starting to fail will reduce airflow across the whole system before it stops entirely. Condenser and compressor service, evaporator coil cleaning, and duct repair and sealing are all part of how this gets resolved, depending on where the restriction turns out to be.
A full system replacement is a bigger commitment than a repair call, and it helps to understand what the job looks like before it starts. The equipment gets selected based on the size of the space, the fuel source, whether ductwork is already in place, and what efficiency level makes sense for the building. We go through those decisions on the call and confirm the scope before anything is scheduled.
The installation itself takes the existing equipment out and puts the new system in during the same visit in most cases. A furnace replacement in a utility room with clear access is a different job from a boiler swap in a tight mechanical space, and the timeline reflects that. The property is without heat or cooling for the duration of the installation, so timing matters, and we talk through the schedule before the work begins.
Where the job involves a new circuit or a disconnect at the panel, that work belongs to the electrician. We handle the heating and cooling equipment and coordinate what needs to happen at the unit level. The HVAC work done properly, start to finish, is the only standard that makes sense.
Diagnosed properly. Explained clearly. Priced before the work. That is how every job runs, whether it is a repair call or a full replacement.
The rate for the visit is given on the phone before anything is scheduled. What moves a quote from there is what the fault turns out to be, how accessible the equipment is, and whether the job calls for a repair or a replacement. A furnace that needs a new igniter is a different conversation from one where the heat exchanger has cracked. A duct sealing job on accessible runs is different from one that requires working in a finished ceiling.
We treat your home the way we'd want ours treated. That means the difference between a repair and a replacement gets laid out plainly, with the reasoning behind it, before you make any decision. Second opinions on replacement quotes are welcomed.
If you have been told a system needs to be replaced and want another look, call (781) 926-9789 and we will scope it.
We cover Weymouth and the neighboring communities throughout Norfolk County. That includes Braintree, Hingham, Quincy, Holbrook, and Rockland. If your address is nearby and not on that list, call and we will confirm coverage on the phone.
The housing stock across this part of the South Shore runs toward older construction, with boilers, oil heat, and homes built without central air still common throughout the area. That shapes the work. Heating calls often involve equipment that has been in place for a long time, and cooling calls frequently involve homes looking to move beyond window units or convert from oil to a heat pump system. Anyone sizing up a job in Weymouth may want to read our full list of heating and cooling services first.
It matters for what the installation involves, not for whether we can help. Homes without ductwork are strong candidates for ductless mini-split systems, which handle both heating and cooling without requiring new duct runs. We scope the system size and layout on the call and explain what the installation covers before anything is scheduled.
Yes, significantly. A well-insulated home with good windows requires less heating and cooling capacity than a drafty one of the same square footage. When a replacement is being scoped, the condition of the building envelope is part of the calculation, not just the floor plan. If major insulation or window work is planned, that is worth mentioning on the call.
A musty smell on startup almost always points at microbial growth on the evaporator coil or in the drain pan, both of which stay damp between cooling cycles. It can also come from debris or standing water in the ductwork. The fix depends on where the growth is, and the visit starts at the coil and the drain before anything else is checked.
The property will be without heating or cooling for the duration of the installation, which is typically several hours. Planning the installation for a mild day when possible, or making arrangements for the occupants during the work, is worth considering. We discuss the timing when the job is scheduled.
Yes. Landlords and property managers with multiple properties can discuss a recurring maintenance arrangement that covers all of them.
Call (781) 926-9789 and describe the portfolio, and we will work out what makes sense for the schedule and the scope.
We handle the heating and cooling equipment side of a conversion from oil to gas or oil to a heat pump. That means removing the existing oil unit and installing the replacement heating system, sized correctly for the space. The gas line and any new electrical circuit belong to the respective trades. We focus on the equipment itself and coordinate what needs to happen at the unit level.
A large share of older homes in this part of Norfolk County heat with boilers running hot water or steam through cast-iron radiators, and oil-fired equipment is still common throughout the area. Boiler diagnostics work differently from furnace diagnostics, and the person who picks up the phone will ask about the equipment type so the visit is scoped correctly from the start. Knowing whether you have a boiler, a furnace, or a heat pump before you call helps move that conversation along.
Someone with access to the property and the equipment needs to be on site for the visit. That can be the tenant, the landlord, or a property manager, as long as they can provide access and are available to confirm the scope and authorize the work before it begins. Arrangements for access should be confirmed before the visit is booked.
The only way to know whether a system is worth keeping is to have someone who knows the equipment actually look at it. We scope the job on the call, confirm the price before the visit is arranged, and give you a straight answer once the system has been checked.
Call (781) 926-9789. We're available every day from 5:00 AM to 9:30 PM.
We cover heating and cooling repair, installation, and replacement across Weymouth and Norfolk County.
Call (781) 926-9789 for a quote.
We take heating and cooling work in these nearby communities as well: Hingham, Rockland, Randolph, Abington, Milton.
Below is a plain-language look at the heating and cooling work we handle across Weymouth and Norfolk County. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a service applies to your situation, call us and we will scope the job on the phone before anything is scheduled.
| Service Type | Scope of Work | Best Suited For | Good to Know |
|---|---|---|---|
| Heat Pump Installation |
| Homeowners converting from oil or gas heat or adding a heat pump to an existing system | Cold-climate heat pumps are sized to the actual load of the space, not just the square footage. The gas line and electrical circuit belong to the respective trades. |
| Full System Installation & ReplacementMost Popular |
| Homeowners or building owners replacing a system that is beyond repair or at the end of its useful life | Equipment options and what each one involves are explained before a decision is made. Where a permit is required, that is handled as part of the installation process. |
| Emergency HVAC Service |
| Homeowners or tenants with a complete loss of heating or cooling, or a system making unusual sounds or odors | We take emergency calls daily from 5:00 AM to 9:30 PM. The situation is scoped on the phone before the visit so the right work gets done on arrival. |
Call (781) 926-9789 to talk through your heating or cooling situation and get a rate before anything is scheduled.
(781) 926-9789